DESCRIPTION
Primax Regal Plastic Emulsion (Acrylic Based) is a super quality emulsion paint with excellent velvety finish. It has a unique durability and better opacity with smooth brush ability. It is pigmented with light fast non lead alkali resistant pigments and durable acrylic binder.

PACKING
16 liters, 4 liters, 1 liter
COLOURS
Wide range of colors is available
COMPOSITION
Lightfast non-lead alkali resisting pigments dispersed in durable acrylic copolymer media.
DRYING TIME
Drying time depends upon temperature and environmental conditions.
RE-COAT
1.5-2 Hours

APPLICATION
Brush, Roller, Spray
THINNING BRUSH / ROLLER
For painting new and bare surface use water up to 50% of the paint thinning and to improve brush or roller application but for normal use it should not go beyond 25-50% water of the paint.
SPRAY
For spray application water should be added up to 25% of the paint.
SURFACE PREPARATION AND APPLICATION PROCEDURE NEW SURFACES
Surface should be clean dry, free from efflorescent salts and loosely adhering matter. Remove dirt, greasy and wax material scuff with suitable sand paper, dust off and prime with Primax Wall Primer Sealer. Fill the surface imperfection with Primax Power Wall Putty and leave the filler to dry overnight, scuff with sand paper, dust off and apply another coat of Primax Primer Sealer followed by 2-3 coats of Primax Regal Plastic Emulsion (Acrylic Based).
PREVIOUSLY PAINTED SURFACES
Remove all defective or poorly adhering material rubbing down using a suitable abrasive paper and dust off. Spot prime and fill surface as described above if required.
POWDERY, DUSTY SURFACES
Make good minor defects. For larger holes and cracks use sand cement mixture. Allow to dry. Prime surface and then fill any surface imperfections with the filler described above. Allow to dry overnight. Scuff surface using abrasive paper and dust off. After preparation apply 3 coats of Primax Regal Plastic Emulsion (Acrylic Based).