Primax Regal Paints

Aqua Grip Wall Primer Sealer

  • Sealer for masonry plaster
  • Sealor for concrete surfaces
  • Prevents damage from alkali and salts
  • Seals the porous surfaces
  • Improves adhesion

DESCRIPTION
Primax Wall Primer Sealer as it name indicates acts as a sealer for masonry plaster and concrete surfaces. It prevents damage from alkali and salts. It seals the porous surfaces and thus reduces the consumption of top-coats. It also improves adhesion.

USES
It is suitable for concrete and plaster surfaces, brick work and ceiling etc. It is also used to seal the poor distempers and lime wash coated surfaces.

COMPOSITION
Alkali resistant binders, stable pigments and inert extenders.
PACKING
16.00 Litres, 4.00 Litres, 1.00 Litre
COLOURS
Pale White
COVERING CAPACITY
90-120 SqFT/Litre/Coat
DRYING TIME
1 Hour
RE-COATING
24 Hours
FILM THICKNESS
10-15 Microns / Coat
GLOSS
Slight sheen
FLASH POINT
34 degree C
THINNER
White spirit / Primax Mixing Oil.
COATS
One Coat

APPLICATION
Brush, Roller
APPLICATION PROCEDURE
NEW SURFACE
Scuff the surface with rubbing stone to remove any loose and friable material. Check that the surface is dry. Then apply a coat of Primax Wall Primer Sealer.
OLD SURFACE
Scrap down the old paint, especially the white wash to bare the surface. Then wash with spray water to remove all the loose material. Then dry and apply a coat of Primax Wall Primer Sealer.

Show Buttons
Hide Buttons