Primax Regal Paints

Synthetic Clear Varnish

  • Air-drying very high gloss
  • Varnish for wood and metal surfaces
  • For improvement of gloss
  • Gives tough, flexible and hard wearing finish

DESCRIPTION
Primax synthetic clear varnish is an air-drying very high gloss varnish for wood and metal surfaces. For improvement of gloss it can be mixed with synthetic enamels. It gives tough, flexible and hard wearing finish.

USES
It is suitable for all types of wood and steel surfaces. Wood and cane-furniture, doors, windows and tongas etc.

COMPOSITION
Non-yellowing synthetic resin medium.
PACKING
12.00 Litres 3.00 Litres, 0.75 Litres 0.250 ML
COLOURS
Clear
COVERING CAPACITY
130-170 SqFt/Litre/Coat
DRYING TIME
SURFACE DRY
1-2 Hours
HARD DRY
24 Hours
TACK FREE
3-4 Hours
RE-COATING
After 16 Hours  
FILM THICKNESS
15-20 microns per coat 
GLOSS
Full gloss. 90-95 % on gloss meter at 60oC            
FLASH POINT
23 degree C       
THINNER
White spirit / Primax Mixing Oil.

APPLICATION
Brush and Spray              
THINNING
Mix 12-15 % of white spirit to the varnish for brush application and mix
15-16 % of white spirit for spray application               
APPLICATION PROCEDURE
NEW SURFACES
Clean wood or metal surface by scuffing with abrasion paper, dust off, wipe
and clean with solvent soaked cloth and apply Primax Synthetic Clear Varnish.
Prior to apply varnish grain filling should be done.
OLD SURFACES
Wash dirt, grease or wax etc. from the surface of previously varnished
objects with detergent water, scuff the surface with suitable sandpaper. Remove
all loosely adhering varnish by scrapping, if the previous varnish is flaking
or in poor condition get rid of all debris, scuff to smoothness of the surface,
dust off and apply Primax Synthetic Clear Varnish (two coats) by brush or spray
giving 20-24 hours between the coats.

Show Buttons
Hide Buttons