Primax Industrial Paints

Chlonirated Rubber Paint

  • Protective finish
  • Applied on the surfaces where protection required

DESCRIPTION
Primax Chlorinated Rubber Paint is a protective finish and applied on the surfaces where protection against chemicals, damp and mould is required.

USES
Chemical plants, laboratories, marine installations, nuclear plants, hospitals, paper and sugar mills etc. can be applied on wood, steel, plaster, concrete and brickwork.

COMPOSITION
Based on chlorinated Rubber.
MISING RATIO
Single pack, ready to use.
APPLICATION
Brush, Spray
COVERING
10-12 meter square / litre / coat
NO OF COATS
2 coats
THINNER
Primax Chlorinated Rubber Thinner / NC Thinner
PACKING
3.64 Liters
COLOUR
Limited colour range.
GLOSS
Full gloss
DRYING TIME
SURFACE DRY
45 Minutes
HARD DRY
24 Hours
RECOAT
8 Hours

APPLICATION
Brush, Spray
NEW UNPAINTED SURFACES
For iron and steel remove dirt, grease and chemical contamination followed by: Chipping, Scraping and Wire brushing to remove all loose scales and surface rust. For concrete and woodwork wash and dry apply on coat of Primax Chlorinated Rubber Paint and recoat it on the other day.
PAINT SURFACES
Primax Chlorinated Rubber Paint may be applied satisfactorily over old paint. If the old paint is likely to lift or is in a condition strip to bare surface. Never recoat on the synthetic finishes.

Show Buttons
Hide Buttons