Primax Luxury Paints

Luxury Emulsion

  • Water borne luxury paint
  • Top quality matt and smooth finish
  • Suitable for all interior, masonry, concrete plaster and brick surfaces

DESCRIPTION
Regal Luxury Emulsion is a water borne top quality matt and smooth finish.

USES
It is suitable for all interior, masonry, concrete plaster and brick surfaces.

COMPOSITION
Based on Poly Vinyl Acetate co-polymer Emulsion.          
PACKING
14.56 Litres, 3.64 Litres,
COLOURS
A wide range of colours is available         
NO.OF COATS
2-3 coats
THINNER
Water
COVERING
120-150 SqFt/Litre/Coat
DRYING TIME
SURFACE DRY
30 Minutes
HARD DRY
3-5 Hours
RE-COATING
2-3 Hours            
FINISH
Matt

APPLICATION
Brush, Roller, Spray        
APPLICATION PROCEDURE
NEW MASONRY SURFACES
Surface should be clean, dry, and free from efflorescent salts and loosely adhering matter. Remove dirty, greasy and waxy material. Scuff with suitable sand paper, dust off and apply Primax Wall Primer Sealer. Apply Primax Power Wall Putty (two coats), leave for at least one day. Scuff with sand paper, dust off and apply two to three coats of Regal Luxury Emulsion.
OLD MASONRY SURFACE
Remove loosely adherent old paint. Repair the old plaster. Smooth the surface with sand paper, Apply Primax Wall Primer Sealer, two coats of Primax Power Wall Putty and proceed as a new surface. For chip boards, hard boards and plywood apply one coat of Primax Wall Primer Sealer, Primax Power Wall Putty and 2-3 coats of Luxury Emulsion.

Show Buttons
Hide Buttons