Primax Magic Bond
Primax Magic Bond – High-Performance Cementitious Tile Adhesive for Walls & Floors
A durable tile installation depends on more than the quality of the tile itself. The adhesive beneath it plays an equally important role in creating a strong and dependable bond between the tile and the prepared substrate.
Primax Magic Bond is a single-component cementitious tile adhesive manufactured with carefully selected aggregates and premium-quality additives. It is specially formulated for fixing a variety of tiles on walls and floors and can be used for both thick-bed and thin-bed applications.
Supplied as a ready-mixed dry powder, Primax Magic Bond requires only the specified amount of clean water for preparation. Its versatility makes it suitable for new tiling projects in internal and external areas as well as demanding commercial and industrial applications.
Why Choose Primax Magic Bond?
Traditional tile installation methods can become difficult when consistent bonding and controlled application are required. A purpose-made cementitious tile adhesive provides a more systematic way to prepare and apply the bonding material.
Primax Magic Bond is formulated as a single-component system, which means the dry powder is mixed with clean water before application. This simplifies preparation while providing a practical adhesive solution for different wall and floor tiling requirements.
Key Benefits
- Single-Component Formula: Requires only the addition of clean water before use.
- Cementitious Tile Adhesive: Made with selected aggregates and premium-quality additives.
- Wall & Floor Application: Suitable for a variety of tiling projects.
- Internal & External Use: Recommended for new tiling in both indoor and outdoor areas.
- Thick & Thin Bed Applications: Suitable for different tile-laying requirements.
- Commercial & Industrial Use: Recommended for demanding heavy-duty tiling projects.
- Versatile Application Areas: Suitable for corridors, pavements, podiums, roofs, walls, and floors.
- Controlled Mixing: Supplied with a defined powder-to-water mixing ratio.
Recommended Uses
Primax Magic Bond is designed for a variety of tiling applications where a cementitious adhesive is required.
Recommended uses include:
- New tiling in internal areas
- New tiling in external areas
- Wall tiling
- Floor tiling
- Heavy commercial applications
- Industrial tiling applications
- Corridors
- Pavements
- Podiums
- Roofs
Suitable for Thick & Thin Bed Applications
Different tiling projects may require different adhesive-bed thicknesses depending on the substrate, tile type, and installation requirements.
Primax Magic Bond is formulated for both thick-bed and thin-bed applications, providing flexibility for a range of wall and floor tiling projects.
The substrate should always be properly prepared before application to support consistent bonding and overall installation performance.
Product Information
| Property | Details |
|---|---|
| Product Name | Primax Magic Bond |
| Product Type | Single-Component Cementitious Tile Adhesive |
| Pack Size | 40 KG |
| Color | Grey |
| Application Areas | Walls and Floors |
| Use Area | Internal and External |
| Application Type | Thick and Thin Bed Applications |
| Mixing Ratio | 20 KG Powder to 5 Litres of Water |
| Storage Temperature | +5°C to +35°C |
Available Pack Size
Primax Magic Bond is available in:
- 40 KG
The quantity required for a project will depend on the tiled area, adhesive-bed thickness, surface condition, tile dimensions, and application method.
Mixing Ratio
Correct water addition is important for obtaining the intended consistency and application performance of Primax Magic Bond.
The stated mixing ratio is:
20 KG of Primax Magic Bond powder to 5 litres of clean water.
Do not exceed the recommended powder-to-water requirement during preparation. Excess water may alter the consistency and intended performance of the adhesive.
How to Mix Primax Magic Bond
- Measure 5 litres of clean water.
- Pour the water into a clean mixing drum or suitable container.
- Measure 20 KG of Primax Magic Bond powder.
- Gradually add the powder into the water while mixing continuously.
- Continue mixing until a smooth and lump-free consistency is achieved.
- Allow the prepared mixture to stand for approximately 5 minutes.
- Re-stir the mixture thoroughly.
- Apply the prepared adhesive onto the suitable substrate.
Following the specified mixing procedure helps achieve a more uniform adhesive consistency and makes application easier.
Importance of the 5-Minute Rest Period
After the powder and water have been mixed into a smooth consistency, the prepared adhesive should be allowed to stand for approximately 5 minutes.
After this resting period, re-stir the material before application. This step is part of the stated preparation procedure and should not be skipped.
Surface Preparation
A strong tile installation begins with a properly prepared substrate. Before applying Primax Magic Bond, the surface should be suitable for receiving the adhesive.
- Remove loose material, dust, dirt, grease, and surface contamination.
- Ensure the substrate is stable and suitable for tiling.
- Remove weak or poorly adhering material before application.
- Repair significant surface defects where necessary.
- Make sure the working area is properly prepared before applying the adhesive.
The exact preparation method may vary according to the substrate and project conditions.
General Application Guidance
- Inspect and properly prepare the substrate.
- Measure clean water according to the specified mixing ratio.
- Gradually add Primax Magic Bond powder while mixing continuously.
- Mix until the adhesive is smooth and free from lumps.
- Allow the mixture to stand for approximately 5 minutes.
- Re-stir before application.
- Apply the prepared adhesive onto the substrate.
- Position the tiles according to the requirements of the tiling project.
The supplied product information does not specify trowel size, open time, adjustment time, curing time, or maximum permissible bed thickness. These values should therefore be confirmed from current technical instructions where required.
Suitable for Internal & External Tiling
Primax Magic Bond is recommended for new tiling in both internal and external areas. This gives contractors, builders, and installers greater flexibility across different areas of a project.
For external applications, the condition of the substrate and environmental conditions should be considered carefully before installation.
Commercial & Industrial Applications
Primax Magic Bond is also recommended for heavy commercial and industrial applications. Areas such as corridors, pavements, podiums, and roofs can experience different service conditions, making proper adhesive selection and installation especially important.
The complete tiling system should always be selected according to the substrate, tile type, application area, and expected service conditions.
Storage Instructions
Correct storage helps protect the dry cementitious material before use.
- Store Primax Magic Bond in its sealed and undamaged original packaging.
- Keep the product in cool and dry conditions.
- Recommended storage temperature is between +5°C and +35°C.
- Protect the bags from direct sunlight.
- Protect the product from humidity.
- Keep the dry powder away from moisture and dampness.
Product Limitations
- Do not exceed the recommended tile bond/water ratio.
- Keep the product away from moisture and dampness.
Using the correct quantity of clean water and keeping the dry material protected during storage are important parts of obtaining consistent product performance.
Common Tile Adhesive Mistakes to Avoid
- Adding too much water: Follow the specified mixing ratio rather than adjusting the mixture with uncontrolled quantities of water.
- Adding all the powder too quickly: Introduce the powder gradually while mixing continuously to help achieve a smooth consistency.
- Leaving lumps in the mixture: Continue mixing until a smooth, lump-free material is obtained.
- Skipping the resting period: Allow the prepared mixture to stand for 5 minutes and then re-stir before application.
- Applying over a poorly prepared substrate: Loose material, dirt, grease, or unstable areas can affect the overall tile installation.
- Allowing the dry powder to become damp during storage: Keep unopened material protected from moisture, humidity, and unsuitable storage conditions.
Frequently Asked Questions
What is Primax Magic Bond?
Primax Magic Bond is a single-component cementitious tile adhesive made with selected aggregates and premium-quality additives for fixing tiles onto suitable walls and floors.
Can Primax Magic Bond be used on floors?
Yes. Primax Magic Bond is recommended for both wall and floor tiling.
Can it be used outdoors?
Yes. The supplied product information recommends Primax Magic Bond for new tiling in both internal and external areas.
Is Primax Magic Bond suitable for commercial projects?
Yes. It is recommended for heavy commercial and industrial applications.
Can Primax Magic Bond be used on roofs?
Yes. Roof tiling is included among the stated recommended uses of the product.
Can it be used for both thick and thin bed applications?
Yes. Primax Magic Bond is formulated for both thick and thin bed applications.
What is the mixing ratio for Primax Magic Bond?
The stated mixing ratio is 20 KG of powder to 5 litres of clean water.
How long should the mixed adhesive rest before application?
After mixing to a smooth, lump-free consistency, allow the material to stand for approximately 5 minutes. Re-stir it before application.
What color is Primax Magic Bond?
Primax Magic Bond is supplied in Grey.
What is the available pack size?
Primax Magic Bond is available in a 40 KG pack.
How should Primax Magic Bond be stored?
Store the product in sealed and undamaged packaging in cool, dry conditions between +5°C and +35°C. Protect it from direct sunlight, humidity, moisture, and dampness.
Build Every Tile on a Stronger Bond
Primax Magic Bond provides a practical cementitious adhesive solution for wall and floor tiling across internal, external, commercial, and industrial projects. Its single-component formulation requires only clean water for preparation and is suitable for both thick and thin bed applications.
With applications ranging from walls and floors to corridors, pavements, podiums, and roofs, Primax Magic Bond provides a versatile option for projects where a strong and durable tile bond is required.
For application guidance, substrate preparation recommendations, project-specific requirements, and product availability, contact Primax Paints or an authorized Primax Paints dealer.
Primax Paints — Bringing Color to Life.
