Primax Hi-Build Road Liner Enamel
Primax Road Liner Enamel – Fast-Drying High-Build Road Marking Paint
Clear and durable road markings are important for maintaining organized traffic areas and improving the visibility of lanes, boundaries, and directional markings. Primax Road Liner Enamel is a fast-drying, color-stable, high-build alkyd traffic road marking paint developed for dependable performance on a variety of properly prepared road surfaces.
Formulated with lightfast pigments and modified alkyd binder technology, Primax Road Liner Enamel provides excellent adhesion and helps produce durable, clearly visible markings on cured asphalt, concrete, brick, and other suitable surfaced highways.
Available in White, Yellow, and Black, it can be applied by spray, roller, or brush, making it a versatile solution for different road and traffic-marking requirements.
Built for Clear & Durable Road Markings
Road surfaces are exposed to traffic movement, dust, changing temperatures, and outdoor conditions. A road-marking coating therefore needs reliable adhesion and a durable film to maintain a clearly defined appearance.
Primax Road Liner Enamel is designed as a high-build alkyd traffic marking paint with fast-drying characteristics and color stability. Its formulation helps create visible and durable markings on suitable prepared road surfaces.
Key Benefits
- Fast Drying: Designed for practical road-marking application with a stated touch-dry time of 1–2 hours.
- High-Build Formulation: Developed as a high-build alkyd traffic road marking paint.
- Color Stable: Formulated with lightfast pigments for dependable color performance.
- Excellent Adhesion: Designed to adhere effectively to suitable prepared road surfaces.
- Multiple Surface Compatibility: Suitable for cured asphalt, concrete, brick, and other surfaced highways.
- Visible Markings: Helps create clearly defined road and traffic markings.
- Multiple Application Methods: Can be applied by spray, roller, or brush.
- Three Practical Colors: Available in White, Yellow, and Black.
Recommended Surfaces
Primax Road Liner Enamel is suitable for marking properly prepared surfaces including:
- Cured asphalt
- Concrete
- Brick surfaces
- Other suitable surfaced highways
Surface condition and preparation remain important for obtaining good adhesion and a uniform road-marking finish.
Typical Road-Marking Applications
Primax Road Liner Enamel can be used where clear traffic and road markings are required. Depending on project requirements, applications may include:
- Traffic lane markings
- Road boundary lines
- Directional markings
- Parking-area markings
- Traffic guidance areas
- Industrial traffic zones
- Other suitable road-surface identification markings
Available Colors
Primax Road Liner Enamel is available in:
- White
- Yellow
- Black
The appropriate color can be selected according to the requirements of the road-marking or traffic-management project.
Product Specifications
| Property | Details |
|---|---|
| Product Name | Primax Road Liner Enamel |
| Product Type | High-Build Alkyd Traffic Road Marking Paint |
| Pack Size | 3.64 L |
| Color Range | White, Yellow, Black |
| Pigment | Lightfast Pigments |
| Binder | Modified Alkyd |
| Solvent | Xylene |
| Flashpoint | 34°C |
| Touch Dry | 1–2 Hours |
| Recoat Time | 3–4 Hours |
| Application Methods | Spray, Roller, Brush |
| Cleanup | Primax N.C. Thinner immediately after use |
Available Pack Size
Primax Road Liner Enamel is available in:
- 3.64 L
High-Build Alkyd Performance
Primax Road Liner Enamel is described as a high-build alkyd traffic road marking paint. A high-build formulation is intended to provide a substantial coating film when applied according to the recommended system.
The final performance of the marking will depend on proper surface preparation, application technique, film formation, drying conditions, and exposure after application.
Excellent Adhesion
Road-marking performance depends strongly on how well the coating bonds to the underlying surface. Primax Road Liner Enamel is formulated to provide excellent adhesion on suitable cured asphalt, concrete, brick, and other properly prepared surfaces.
Dust, grease, loose material, moisture, or poorly prepared areas can interfere with coating adhesion and should be addressed before application.
Surface Preparation
Proper surface preparation is essential before applying Primax Road Liner Enamel.
- Remove dust, dirt, grease, oil, and loose contamination.
- Ensure asphalt surfaces are suitably cured before application.
- Remove loose or poorly adhering existing markings where necessary.
- Make sure concrete, brick, or other substrates are stable and suitable for coating.
- Ensure the application area is suitably dry.
- Mark out lines and boundaries before painting where required.
Different road substrates may require different preparation procedures, so the condition of the surface should be assessed before application.
Application Methods
Primax Road Liner Enamel can be applied using:
- Spray
- Roller
- Brush
The application method can be selected according to the size, shape, and requirements of the marking area.
General Application Guidance
- Inspect the road surface before application.
- Remove dirt, dust, grease, oil, and loose contamination.
- Ensure the substrate is suitably cured, stable, and dry.
- Mark out the required traffic lines or areas where necessary.
- Mix Primax Road Liner Enamel thoroughly before use.
- Apply an even coat using spray, roller, or brush.
- Maintain consistent film application for clearly defined markings.
- Allow the first coat to dry adequately before recoating.
- Protect freshly painted markings from traffic until sufficiently dry.
- Clean all application equipment immediately after use.
Drying & Recoat Time
Under normal conditions, Primax Road Liner Enamel has the following stated drying times:
- Touch Dry: 1–2 hours
- Recoat: 3–4 hours
Actual drying time may vary depending on temperature, humidity, air movement, substrate temperature, film thickness, and application conditions.
The freshly marked area should be protected until the coating has dried sufficiently for the intended service conditions.
Equipment Cleanup
Clean spray equipment, rollers, brushes, mixing containers, and other tools with Primax N.C. Thinner immediately after use.
Prompt cleaning helps prevent dried coating material from building up inside application equipment.
Common Application Mistakes to Avoid
- Applying on uncured asphalt: The product is specified for cured asphalt surfaces.
- Painting over dust or contamination: Road surfaces should be properly cleaned before application.
- Applying on a wet surface: The substrate should be suitably dry before marking.
- Uneven application: Inconsistent coating thickness can affect the finished appearance of road markings.
- Recoating too early: Allow approximately 3–4 hours before recoating under normal conditions.
- Opening the area to traffic too soon: Protect fresh markings until the coating has dried adequately.
- Delayed equipment cleaning: Clean application tools with Primax N.C. Thinner immediately after use.
Safety & Handling
Primax Road Liner Enamel contains Xylene and has a stated flashpoint of 34°C. Appropriate safety precautions should therefore be followed during storage, application, and equipment cleaning.
- Keep away from heat, sparks, flames, and other ignition sources.
- Do not smoke while using or storing the product.
- Use in a well-ventilated area.
- Avoid unnecessary inhalation of vapours or spray mist.
- Use suitable gloves, eye protection, and appropriate personal protective equipment.
- Keep containers tightly closed when not in use.
- Keep out of the reach of children.
Frequently Asked Questions
What is Primax Road Liner Enamel?
Primax Road Liner Enamel is a fast-drying, color-stable, high-build alkyd traffic road marking paint designed to provide durable and visible markings on suitable road surfaces.
Which surfaces can Primax Road Liner Enamel be applied to?
It is suitable for cured asphalt, concrete, brick, and other suitable surfaced highways.
Can Primax Road Liner Enamel be applied to asphalt?
Yes. The product is specifically stated as suitable for cured asphalt.
Can it be applied on concrete?
Yes. Properly prepared concrete is included among the recommended surfaces.
Which colors are available?
Primax Road Liner Enamel is available in White, Yellow, and Black.
How can Primax Road Liner Enamel be applied?
The specified application methods are spray, roller, and brush.
How long does the paint take to dry?
The stated touch-dry time is approximately 1–2 hours.
When can another coat be applied?
The stated recoat time is approximately 3–4 hours.
What type of binder is used?
Primax Road Liner Enamel uses Modified Alkyd as the stated binder.
Which solvent does it contain?
The stated solvent is Xylene.
What pack size is available?
Primax Road Liner Enamel is available in a 3.64 L pack.
How should equipment be cleaned?
Clean all application equipment with Primax N.C. Thinner immediately after use.
Clear Lines. Durable Road Performance.
Primax Road Liner Enamel combines fast drying, color stability, excellent adhesion, and a high-build modified alkyd formulation to provide dependable markings on cured asphalt, concrete, brick, and other suitable surfaced highways.
Available in White, Yellow, and Black and suitable for spray, roller, or brush application, it provides a practical road-marking solution where durability and clear visibility are important.
For application guidance, surface preparation recommendations, project-specific requirements, and product availability, contact Primax Paints or an authorized Primax Paints dealer.
Primax Paints — Bringing Color to Life.
