Primax Power Economy Synthetic Undercoat
Primax Power Economy Synthetic Undercoat – Smooth Base for Durable Topcoat Finishes
A well-prepared base plays an important role in achieving a smooth and professionally finished topcoat. Primax Power Economy Synthetic Undercoat is a quick-drying undercoat designed to provide excellent filling and adhesion properties while creating a suitable foundation for a range of compatible finishing systems.
Its alkyd resin-based formulation is designed for practical application and easy sanding after overnight air drying. Once properly prepared, the undercoat can be over-coated with synthetic enamel, hammer tone, metallic finishes, and automotive lacquers.
Available in white, Primax Power Economy Synthetic Undercoat offers a dependable preparation layer for projects where smoothness, adhesion, and compatibility with different topcoats are important.
Why Use a Synthetic Undercoat?
The quality of the final paint finish depends heavily on the condition of the layer underneath it. Surface irregularities, poor preparation, or an unsuitable base can affect both appearance and adhesion.
Primax Power Economy Synthetic Undercoat is formulated to provide filling and adhesion properties that help prepare compatible surfaces before the finishing coat is applied. Its sandable nature also allows the surface to be refined before top-coating.
Key Benefits
- Quick-Drying Formula: Designed for practical drying between preparation and finishing stages.
- Excellent Filling: Helps create a more uniform base before the topcoat.
- Good Adhesion: Supports proper bonding of the coating system on suitably prepared surfaces.
- Easy Sanding: Formulated for convenient sanding after overnight air drying.
- Versatile Topcoat Compatibility: Can be over-coated with synthetic enamel, hammer tone, metallic finishes, and automotive lacquers.
- Multiple Application Methods: Suitable for brush, roller, and spray application.
- White Undercoat: Supplied in white for a clean preparation layer.
- Practical Coverage: Provides 9–11 m²/litre/coat under normal conditions.
A Smooth Base Before the Final Finish
Primax Power Economy Synthetic Undercoat is designed to act as an intermediate preparation layer before compatible finishing coats are applied.
Its filling properties help improve the uniformity of the prepared surface, while sanding after suitable drying can further refine the base. This helps create better conditions for the final decorative coating.
Compatible Topcoats
According to the supplied product information, Primax Power Economy Synthetic Undercoat can be over-coated with:
- Synthetic Enamel
- Hammer Tone
- Metallic Finishes
- Automotive Lacquers
The selected topcoat should be applied after the undercoat has been properly dried and prepared according to the requirements of the complete coating system.
Product Specifications
| Property | Details |
|---|---|
| Product Name | Primax Power Economy Synthetic Undercoat |
| Pack Sizes | 0.91 Litre, 3.64 Litre |
| Color Range | White Only |
| Pigment | Lightfast Pigments & Inert Fillers |
| Binder | Alkyd Resin |
| Solvent | Mineral Turpentine |
| Flashpoint | 34°C |
| Touch Dry | 1–2 Hours |
| Recoat Time | 4–6 Hours |
| Application Methods | Brush, Roller, Spray |
| Brush / Roller Thinning | 10–25% |
| Conventional Spray Thinning | 30–40% |
| Recommended Thinner | Mineral Turpentine / Primax Mixing Oil |
| Coverage | 9–11 m²/litre/coat under normal conditions |
| Cleanup | Mineral Turpentine |
Available Pack Sizes
Primax Power Economy Synthetic Undercoat is available in:
- 0.91 Litre
- 3.64 Litre
The appropriate pack size can be selected according to the total surface area and requirements of the project.
White Undercoat
Primax Power Economy Synthetic Undercoat is supplied in White Only. The white base provides a clean preparation layer before application of the selected compatible finishing system.
Surface Preparation
Proper surface preparation is essential for obtaining reliable adhesion and a smooth final finish. Before applying Primax Power Economy Synthetic Undercoat, make sure the surface is suitable for coating.
- Remove dust, dirt, grease, oil, and loose material.
- Remove weak or poorly adhering previous coatings where required.
- Sand rough or uneven areas where necessary.
- Remove all sanding dust before application.
- Ensure the substrate is clean, suitably dry, sound, and stable.
- Use the appropriate preparation system required for the particular substrate.
Application Methods
Primax Power Economy Synthetic Undercoat can be applied using:
- Brush
- Roller
- Spray
The most suitable method can be selected according to the project, surface condition, and required finish.
Thinning Guide
| Application Method | Recommended Thinning | Thinner |
|---|---|---|
| Brush / Roller | 10–25% | Mineral Turpentine / Primax Mixing Oil |
| Conventional Spray | 30–40% | Mineral Turpentine / Primax Mixing Oil |
Conventional spray application is stated to be satisfactory through most suitable equipment.
General Application Guidance
- Ensure the surface is properly cleaned and prepared.
- Mix Primax Power Economy Synthetic Undercoat thoroughly before application.
- Select brush, roller, or spray according to the project requirements.
- Thin the product according to the specified application method.
- Apply an even and uniform coat over the prepared surface.
- Allow the undercoat to dry sufficiently before recoating.
- For sanding, allow suitable air drying as recommended.
- Sand the dried undercoat where required to achieve a smoother base.
- Remove all sanding dust before applying the selected topcoat.
- Clean application equipment immediately after use.
Easy Sanding After Overnight Air Drying
One of the practical benefits of Primax Power Economy Synthetic Undercoat is its sanding performance. The formulation is designed to allow easy sanding after overnight air drying.
Sanding can help remove minor irregularities and refine the prepared surface before the finishing coat is applied. After sanding, all dust should be removed thoroughly to avoid affecting the topcoat finish.
Drying & Recoat Time
Under normal conditions, the stated drying times are:
- Touch Dry: 1–2 Hours
- Recoat: 4–6 Hours
Actual drying time may vary depending on temperature, humidity, ventilation, thinning level, film thickness, and surface conditions.
Where sanding is required, the product description recommends allowing overnight air drying before sanding.
Coverage
Primax Power Economy Synthetic Undercoat provides a stated coverage of approximately:
9–11 m² per litre per coat under normal conditions.
Actual coverage can vary according to surface texture, porosity, application method, thinning, film thickness, and material loss during application.
Equipment Cleanup
Clean brushes, rollers, spray equipment, and other application tools with Mineral Turpentine immediately after use.
Cleaning equipment promptly helps prevent coating material from drying inside brushes or spray equipment.
Common Application Mistakes to Avoid
- Poor surface preparation: Dust, oil, loose coatings, and surface contamination can affect adhesion and the quality of the final coating system.
- Incorrect thinning: Follow the specified thinning range for brush, roller, or conventional spray application.
- Sanding too early: Allow suitable drying time. The product is designed for easy sanding after overnight air drying.
- Leaving sanding dust on the surface: Remove dust thoroughly before applying the topcoat.
- Recoating too early: Allow the stated 4–6 hour recoat time under normal conditions.
- Applying an incompatible topcoat: Use suitable finishing systems recommended for this undercoat.
- Failing to clean equipment: Clean all application tools with Mineral Turpentine immediately after use.
Safety & Handling
Primax Power Economy Synthetic Undercoat contains Mineral Turpentine and has a stated flashpoint of 34°C. Appropriate precautions should therefore be followed during application, storage, thinning, and cleanup.
- Keep away from heat, flames, sparks, and ignition sources.
- Do not smoke during application or handling.
- Use in a well-ventilated environment.
- Avoid unnecessary inhalation of vapours or spray mist.
- Use suitable gloves, eye protection, and other appropriate protective equipment.
- Keep the container tightly closed when not in use.
- Keep out of the reach of children.
Frequently Asked Questions
What is Primax Power Economy Synthetic Undercoat?
Primax Power Economy Synthetic Undercoat is a quick-drying alkyd resin-based preparation coating designed to provide filling, adhesion, and a smooth base before compatible finishing coats are applied.
What color is Primax Power Economy Synthetic Undercoat?
The product is available in White Only.
Can synthetic enamel be applied over it?
Yes. Synthetic enamel is specifically listed as one of the compatible topcoats.
Can hammer tone be applied over this undercoat?
Yes. Primax Power Economy Synthetic Undercoat can be over-coated with a suitable hammer tone finish.
Can it be used under metallic finishes?
Yes. Metallic finishes are included among the stated compatible finishing systems.
Can automotive lacquer be applied over it?
Yes. The supplied product information states that the undercoat can also be over-coated with automotive lacquers.
How long does it take to dry?
The stated touch-dry time is approximately 1–2 hours under normal conditions.
When can another coat be applied?
The stated recoat time is approximately 4–6 hours.
When can the undercoat be sanded?
The formulation is designed to allow easy sanding after overnight air drying.
How much thinner should be added for brush or roller application?
For brush or roller application, the stated thinning range is 10–25% using Mineral Turpentine or Primax Mixing Oil.
What is the thinning ratio for conventional spray?
For conventional spray application, the stated thinning range is 30–40%.
What is the coverage?
The stated coverage is approximately 9–11 m²/litre/coat under normal conditions.
Which pack sizes are available?
Primax Power Economy Synthetic Undercoat is available in 0.91 Litre and 3.64 Litre pack sizes.
How should the equipment be cleaned?
Clean all application equipment with Mineral Turpentine immediately after use.
A Better Finish Starts with the Right Base
Primax Power Economy Synthetic Undercoat provides the filling, adhesion, drying, and sanding characteristics needed to create a smooth preparation layer before compatible finishing coats are applied.
With brush, roller, and spray application options, practical coverage, controlled thinning ranges, and compatibility with synthetic enamel, hammer tone, metallic finishes, and automotive lacquers, it provides a versatile base for a variety of coating systems.
For application guidance, substrate-specific preparation, compatible coating systems, and product availability, contact Primax Paints or an authorized Primax Paints dealer.
Primax Paints — Bringing Color to Life.
