Primax Regal Synthetic Metallic
Primax Regal Synthetic Metallic – Durable Metallic Finish for Wood & Metal Surfaces
A metallic finish can add a distinctive appearance to wood and metal surfaces, but achieving a durable result depends on choosing the right coating and preparing the surface correctly. Primax Regal Synthetic Metallic is developed for properly primed wood and metal surfaces where an attractive metallic finish and dependable weather resistance are required.
Designed as a synthetic metallic topcoat, it can be used on properly prepared and correctly primed steel, iron, zinc, wood, and galvanized substrates. Its formulation combines colorfast and metallic pigments with modified alkyd resin to produce a decorative metallic appearance while helping the finished surface withstand normal weather exposure.
Why Choose Primax Regal Synthetic Metallic?
Metallic finishes are often selected where ordinary solid-color coatings cannot provide the desired decorative effect. However, appearance alone is not enough. The coating also needs to form a reliable finishing layer over the correctly prepared substrate.
Primax Regal Synthetic Metallic provides a combination of metallic appearance, weather resistance, and practical durability. When applied over an appropriate primer and properly prepared surface, it creates an attractive topcoat suitable for a variety of wood and metal applications.
Key Benefits
- Provides an attractive metallic decorative finish.
- Suitable for properly primed wood and metal surfaces.
- Offers excellent weather resistance.
- Can be used as a topcoat over steel, iron, zinc, wood, and galvanized substrates.
- Contains colorfast and metallic pigments.
- Based on modified alkyd resin technology.
- Provides practical coverage under normal application conditions.
- Available in shades according to the appropriate Primax shade card.
Recommended Surfaces
Primax Regal Synthetic Metallic is suitable for use as a finishing coat on correctly primed surfaces including:
- Steel
- Iron
- Zinc
- Wood
- Galvanized substrates
For best results, each substrate should be correctly prepared and coated with a suitable primer before application of the metallic topcoat.
Typical Applications
Depending on the project and substrate, the product may be used on suitable decorative wood and metal elements where a metallic finish is required, such as:
- Metal gates and doors
- Railings and grills
- Decorative steel and iron components
- Properly prepared galvanized items
- Wooden decorative surfaces
- Fabricated metal components
- Interior and exterior decorative metalwork
Product Specifications
| Property | Details |
|---|---|
| Product | Primax Regal Synthetic Metallic |
| Recommended Use | Topcoat for correctly primed wood and metal surfaces |
| Colour Range | Refer to the appropriate shade card |
| Pigment | Colorfast and metallic pigments |
| Binder | Modified Alkyd Resin |
| Solvent | Mineral Turpentine / Super Petrol |
| Flashpoint | 36°C |
| Touch Dry | 2–4 hours |
| Recoat Time | 6–8 hours |
| Application Method | Spray |
| Coverage | 12–14 m²/litre/coat under normal conditions |
| Brush Thinning | 10–15% |
| Conventional Spray Thinning | 20–25% |
| Cleanup | Thinner/Cleaner, PRIMAX Mixing Oil, or Super Petrol |
Available Pack Sizes
Primax Regal Synthetic Metallic is available in:
- 0.91 L
- 3.64 L
The suitable pack size should be selected according to the total surface area, application method, number of coats required, and expected material loss during application.
Colour Range
Primax Regal Synthetic Metallic is available in a selection of metallic colours. Refer to the appropriate Primax shade card for available shade options.
The appearance of a metallic shade can be influenced by the substrate, surface preparation, application technique, film thickness, spray pattern, and lighting conditions. For larger projects, confirming the selected shade before full application can help achieve a more consistent final appearance.
Surface Preparation
Good surface preparation is essential before applying Primax Regal Synthetic Metallic. The product is intended for use over correctly primed surfaces, so the condition of both the substrate and primer can affect the final appearance and durability.
Metal Surfaces
- Ensure that the surface is clean, dry, and properly prepared.
- Remove dust, dirt, grease, oil, loose material, and surface contamination.
- Remove loose or poorly adhering existing coatings where necessary.
- Treat the substrate according to its type before priming.
- Apply a suitable primer and allow it to dry properly before applying the metallic topcoat.
Wood Surfaces
- Ensure that the wood is clean, dry, smooth, and sound.
- Remove dust and other surface contamination.
- Prepare and smooth the surface as required.
- Use the appropriate Primax preparation system and suitable primer before applying the metallic finish.
Application
The supplied technical information specifies spray application for Primax Regal Synthetic Metallic. A controlled and consistent application technique is especially important with metallic coatings because variations in spray movement or film thickness can affect the appearance of the metallic finish.
- Make sure the substrate has been correctly prepared and primed.
- Ensure the primer is sufficiently dry before applying the topcoat.
- Mix the product thoroughly before application so the metallic pigments are evenly distributed.
- Thin the material according to the recommended ratio for the intended application method.
- For conventional spray application, use the specified thinning range of 20–25%.
- Apply the coating evenly and consistently over the prepared surface.
- Maintain a consistent spray distance and movement to support a uniform metallic appearance.
- Allow adequate drying time between coats.
- Clean all application equipment immediately after use.
Drying and Recoating
Under normal conditions, Primax Regal Synthetic Metallic has the following drying times:
- Touch Dry: 2–4 hours
- Recoat: 6–8 hours
Actual drying time may vary depending on temperature, humidity, ventilation, applied film thickness, thinning level, substrate condition, and application method. Allow the coating to dry adequately before applying the next coat.
Coverage
The expected coverage of Primax Regal Synthetic Metallic is approximately 12–14 m² per litre per coat under normal conditions.
Actual coverage may vary according to surface profile, substrate condition, application technique, film thickness, thinning, overspray, and material loss during application.
Thinning Guide
| Application | Recommended Thinning |
|---|---|
| Brush | 10–15% |
| Conventional Spray | 20–25% |
Avoid excessive thinning, as it may affect film build, hiding, application behaviour, and the appearance of the finished coating.
Equipment Cleanup
Immediately after application, clean all equipment using the recommended Thinner/Cleaner, PRIMAX Mixing Oil, or Super Petrol. Cleaning tools before the coating material dries will make maintenance easier and help keep application equipment ready for future use.
Common Mistakes to Avoid
- Applying over an unprimed surface: The product is intended for correctly primed wood and metal surfaces.
- Poor surface cleaning: Grease, dust, oil, and loose material may affect coating performance.
- Uneven application: Metallic pigments can highlight inconsistencies in application technique.
- Incorrect thinning: Follow the recommended thinning range for the selected method.
- Insufficient mixing: Metallic pigments should be distributed uniformly before and during application.
- Recoating too soon: Observe the recommended 6–8 hour recoating period under normal conditions.
- Inconsistent spray technique: Changes in spray distance, overlap, or movement can affect the visual uniformity of metallic finishes.
Safety and Handling
Primax Regal Synthetic Metallic is a solvent-based coating with a stated flashpoint of 36°C. Appropriate care should therefore be taken during storage, preparation, application, and cleanup.
- Keep the product away from flames, sparks, heat, and other ignition sources.
- Use in a properly ventilated environment.
- Avoid unnecessary inhalation of vapours and spray mist.
- Use suitable personal protective equipment during application.
- Keep containers properly closed when not in use.
- Keep away from children.
Frequently Asked Questions
What is Primax Regal Synthetic Metallic used for?
It is designed as a metallic topcoat for correctly primed wood and metal surfaces, including steel, iron, zinc, wood, and galvanized substrates.
Can it be used outdoors?
The supplied product information describes Primax Regal Synthetic Metallic as having excellent weather resistance and suitable for correctly prepared and primed surfaces where a durable metallic topcoat is required.
What finish does it provide?
It provides an attractive metallic finish using colorfast and metallic pigments.
How long does Primax Regal Synthetic Metallic take to dry?
It becomes touch dry in approximately 2–4 hours and can be recoated after approximately 6–8 hours under normal conditions.
What is its coverage?
The stated coverage is approximately 12–14 m² per litre per coat under normal conditions.
How much thinner is required for spray application?
For conventional spray application, the recommended thinning ratio is 20–25%.
Which pack sizes are available?
Primax Regal Synthetic Metallic is available in 0.91 L and 3.64 L pack sizes.
Where can I find the available metallic colours?
Refer to the appropriate Primax shade card for the available colour range.
A Distinctive Metallic Finish with Dependable Performance
Primax Regal Synthetic Metallic combines a decorative metallic appearance with weather resistance for correctly primed wood and metal surfaces. With colorfast metallic pigments, modified alkyd resin, practical coverage, and a range of available metallic shades, it provides a dependable finishing option for suitable decorative applications.
For current shade availability, pack details, application guidance, and suitable preparation systems, contact Primax Paints or an authorized Primax Paints dealer.
Primax Paints — Bringing Color to Life.
