Primax Regal Wall Primer Sealer
Primax Regal Wall Primer Sealer as its name indicates acts as a sealer for masonry plaster and concrete surfaces. It prevents damage from alkali and salts. It seals the porous surfaces and thus reduces the consumption of top coats. It also improves adhesion. It is suitable for concrete and plaster surfaces, brickwork and ceiling etc. It is also used to seal poor distempers and lime wash-coated surfaces.
Pack Size:1L 4L 16L
Color Range: White
Composition (Nominal):
Pigment: Stable Pigments, Inert Extender
Binder: Alkali Resistant Polymer
Solvent: White spirit / Primax Mixing Oil
Flashpoint: 33 degrees C
Drying Time: Depends on temperature, humidity, air movements and film thickness
Touch Dry: 2-4 Hours
Recoat: 4-6Hours
Application: Brush Roller Spray
Theoretical coverage: A guide to the theoretical coverage achieved under normal conditions is 8 – 11 m2/litre/coat.
Thinning: Brush or Roller: 10 - 25% Conventional spray: 30 - 40%
Cleaning Up: Clean all equipment with water immediately after use.
